colinworth79 Posted April 1, 2023 Share Posted April 1, 2023 Has anyone got a 1127 block they could measure the o/d of the liner at the bottom where it goes into the crankcase . I'm collecting parts to tune my 1100 m engine and have a few spare bandit 1200 blocks and was hoping to use one for a big bore . The base gaskets for the 2 models are the same part number but was under the impression the bandit block had slightly thicker liners . Quote Link to comment
colinworth79 Posted April 1, 2023 Author Share Posted April 1, 2023 Bandit block measures 85.5 mm 1 Quote Link to comment
clivegto Posted April 1, 2023 Share Posted April 1, 2023 Look to be 85mm straight sleeve on the 1127 the b12 has a step in the bottom of the sleeve. Quote Link to comment
colinworth79 Posted April 2, 2023 Author Share Posted April 2, 2023 Cheers Clive for the reply . Should fit straight on then Quote Link to comment
clivegto Posted April 2, 2023 Share Posted April 2, 2023 8 hours ago, colinworth79 said: Cheers Clive for the reply . Should fit straight on then Yes the base gaskets are interchangeably but the liners aren't. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.