Otis76 Posted March 19, 2023 Share Posted March 19, 2023 Hello. I am just wondering if it is a big hassel to replace the stock dash/instruments to a aftermarket speedo/neutral/light/turn only. Can i just use the wiring i need and leave the orhers?? Or is the bike needing the stock instruments to start/run and so on?? Quote Link to comment
Gixer1460 Posted March 19, 2023 Share Posted March 19, 2023 Most bikes will run, start and stop without any instrument's whatsoever - so you can do whatever floats your boat. BUT finding instruments that are supported by 'old analogue' wiring and sensors may need some thinking about but not insurmountable! Quote Link to comment
Otis76 Posted March 19, 2023 Author Share Posted March 19, 2023 I have a few of the Eblag/Amazon universal gauges laying around. I guess they are working then. Quote Link to comment
Dezza Posted March 20, 2023 Share Posted March 20, 2023 It will be quite straightforward to convert to an aftermarket multi gauge, e.g. Koso, Daytona. You'll have to convert to an electronic speedo though, which isn't difficult. On removal of the stock clocks you may also want to remove the silly and unecessarily complicated warning light unit, because then you can remove several tonnes of excess wire from the loom. EFE clock sets are also fairly desireable as their appearance is a key feature of the positive parts of the overall EFE styling so if getting rid this will offset to some degree the costs of the conversion. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.