rf coil stick conversion

[gixermike]

i have an rf900 and wondering how easy it is to swap the twin coils for the four individual coil sticks 

thank you 

[Gixer1460]

Can be done but stick coils tend to have low impedance (1 or sub 1 ohm) so draw more amps than a std 3.0 ohm coil so either wire in series (so each coil sees 6v nominal) or add a cyrrent limiting resistor to each coil. Been discussed on here loads of times - do a search! A stock CDI unit may struggle passing too many amps if sticks just wired up!

[TJS]

https://pin.it/3wyyAs6

[TJS]