Col66 Posted August 16, 2021 Posted August 16, 2021 Bikes running great, it just keeps running when I turn the ignition switch off! Fitted new iggy switch, new starter solenoid, checked all earth leads, stripped all handlebar switches and cleaned contacts. Now I've the neutral light and high beam light, when I swapped out the starter solenoid. Any ideas out there? Pulling my hair out..... Quote
Blubber Posted August 16, 2021 Posted August 16, 2021 Sound like an electrical issue. Probably in the main harness or loom . Time to trace the switched power from the diagram Quote
wraith Posted August 16, 2021 Posted August 16, 2021 What bike is it? as above, time to start into the main harness. has the harness been cut about already? Do all the lights etc go off when you turn the ignition switch off or do they stay on? take it the engine kill switch dose not stop the engine from running? side stand switch or clutch switch not do anything? fuse box looks ok? Take out main fuse what happens? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.