B12 off boost running problem

[BanditPervert]

So finally fixed my earlier f***up and have the engine and turbo back on the bike.

have started plumbing up the fpr, pump and plenum but getting my wires crossed with the vacuum/ pressure references. 

had a look at previous threads and seems some people are using carb tops to feed fpr, am I reading this right?

I have BOV, gauge and float vents fed from plenum, in wastegate fed from compressor outlet housing and FPR from linked carb tops.

 

[BanditPervert]

*correction 

Float bowl vents are fed from pilot tube in charge pipe before BOV.

[colinworth79]

Bov need to see vacuum to work so off carb tops .

Fuel pressure reg either plenum or carb tops .

Gauge depends on what you have if it has vac then  carb tops.

I make a small manifold that links all 4 carb tops then took items off this to give a smoother reading.

[BanditPervert]

On 5/2/2021 at 7:09 PM, colinworth79 said:

Bov need to see vacuum to work so off carb tops .

Fuel pressure reg either plenum or carb tops .

Gauge depends on what you have if it has vac then  carb tops.

I make a small manifold that links all 4 carb tops then took items off this to give a smoother reading.

Ok thanks for the response.