BanditPervert Posted February 7, 2021 Share Posted February 7, 2021 Does anyone know if the dynojet needles are suitable for the stock main jets. I have the 102.5s installed as I’ve read on here that the stock jetting is fine for the turbo set up. Been running it today but the mixture is way too rich/ new plugs black. thanks Quote Link to comment
MeanBean49 Posted February 7, 2021 Share Posted February 7, 2021 General consensus is dynojet needles are a pain in the arse for turbo use, best off sticking to standard. You probably could get them to work but would take way more dyno time than setting up using standard ones Quote Link to comment
BanditPervert Posted February 7, 2021 Author Share Posted February 7, 2021 I guessed it may take a bit fuckery to get working but it was more to do with the taper shape on the end of the needle. think your right and I’ll stick to the stock ones unless I can find a measurement to replicate. thanks for the response Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.