Bandit carb settings

[BanditPervert]

Does anyone know if the dynojet needles are suitable for the stock main jets. I have the 102.5s installed as I’ve read on here that the stock jetting is fine for the turbo set up. Been running it today but the mixture is way too rich/ new plugs black. 
 

thanks 

[MeanBean49]

General consensus is dynojet needles are a pain in the arse for turbo use, best off sticking to standard.

You probably could get them to work but would take way more dyno time than setting up using standard ones

[BanditPervert]

I guessed it may take a bit fuckery to get working but it was more to do with the taper shape on the end of the needle. 
 

think your right and I’ll stick to the stock ones unless I can find a measurement to replicate. 
 

thanks for the response