Bandit 6 mk1

[Marc clayton]

Right then chaps 

 

mate of mine has a bandit 6 (not me!!) helping him fix it, speedo doesn’t work, I’ve checked the cable attached to a drill and to the clocks and that all works (mi drill managed 40mph lol)

so I’m now left with the speedo drive, I’ve taken it off, but it’s looks reet to me?? Obviously not, 

 

what I’m asking is they any way of fixing them? Or even being able to tell if it’s fuuuuked or not? 
 

cheers 
 

that’s the little shit bag in question!

[Blubber]

Put a big block in it 

Then you wont feel ashamed of your mate. 

 

 

As for the other problem:

Check if the inner cable rotates when attached to the speedo drive.  The square bit on the cable end sometimes snaps off making it look okay bit ends up to short and wont engage drive side

[fatblokeonbandit]

Turn the placcy bit and see if the squiblet that turns the cable is moving

[Marc clayton]

It does turn little bit, but it feels notchy, It works sweet if i pull the plastic spline bit out slightly it runs smooth, but that’s not where it sits when it’s on the bike
 

 

Edited June 4, 2020 by Marc clayton

[Marc clayton]

10 minutes ago, Blubber said:

Put a big block in it 

Then you wont feel ashamed of your mate. 

 

 

As for the other problem:

Check if the inner cable rotates when attached to the speedo drive.  The square bit on the cable end sometimes snaps off making it look okay bit ends up to short and wont engage drive side

Not mine lol 

 

ive got a teapot 6 with an 1127 lol never be ashamed of my ratter lol

[Marc clayton]

Forgot to say the cable is a spanker