Tombola Posted June 2, 2020 Posted June 2, 2020 How much extra do people put into their swim arm? Bike is 750gsxr, I do plan to use it on the road and strip. I was planning on jigging it and then infilling with 80x40mm structural aluminium 6082. im pretty sure the wheel end piece is “spigotted” do people spigot the other end to join it into existing box? I’ll be cutting on the red lines and using a new piece to extend it. Bike will be around the 200hp mark Quote
Gixer1460 Posted June 2, 2020 Posted June 2, 2020 Virtually no one does it that way! If you do, you are married to the minimum 3" over length. The more usual way iscut the adjuster off and make a new over length one, spigotted into the extg. box section - other advantage only one weld! Quote
Tombola Posted June 2, 2020 Author Posted June 2, 2020 (edited) If that’s the way to do it fair enough I’ll do it that way. What sort of extension do you recommend? For road and light strip use? Edited June 2, 2020 by Tombola Quote
Tombola Posted June 13, 2020 Author Posted June 13, 2020 (edited) On 6/2/2020 at 9:18 AM, Gixer1460 said: Virtually no one does it that way! If you do, you are married to the minimum 3" over length. The more usual way iscut the adjuster off and make a new over length one, spigotted into the extg. box section - other advantage only one weld! Hopefully this is better! Edited June 13, 2020 by Tombola Shit grammer 3 Quote
Gixer1460 Posted June 13, 2020 Posted June 13, 2020 Doesn't that look better all round ! Nice work. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.