Front end on

[Wad325]

Managed to get front end fitted thanks in part for someone very kind help ,was going to do rear but swinging arm bearings I'd 16mm my 750 spindle 14mm so going to have to change bearings Or inner  sleeves for now to get a rolling chassis 

[no class]

usually you can just fit the inner sleeves .... keeping your spindle size the same .....

[Wad325]

Yeah buddy but can't get sleeve on own don't think 

Edited April 11, 2020 by Wad325
Spelling

[no class]

what swinger ?  

[fatblokeonbandit]

23 minutes ago, Wad325 said:

Yeah buddy but can't get sleeve on own don't think 

what size do you need, 

 

I/D of 14mm same as spindle

O/D of 22mm same as original and 30 mm long???

 

do some measuring up, some bearing inners are available on their own.. 

[Wad325]

Metmachex think it's for 1100 /gs1000 which believe have 16mm spindle bud

[Wad325]

2 minutes ago, fatblokeonbandit said:

what size do you need, 

 

I/D of 14mm same as spindle

O/D of 22mm same as original and 30 mm long???

 

do some measuring up, some bearing inners are available on their own.. 

Are they bud were from please mate ,tried ones or centre bush in bandit swinging arm roller and fitted perfect so just as you say 14id  ones bud 

[Wad325]

Excuse my English wasnt at school often 

[fatblokeonbandit]

Ill have a look at out bearing suppliers at work on Monday, or just run a 16mm drill through the frame if there is enough meat in it.. Do a picture of the frame holes

[Wad325]

Frame been stoved bud and only got 14mm spindle any way bud someone having look see if got set out of swingarm but if you could look when back at work would be much appreciated mate

[no class]

the original sleeves for that frame/swingarm.......should slip inside the new swingarm.........as for example.... a katana sleeve fits a gsxr 

 

[Wad325]

Yeah haven't got original swinging arm some looking for me bud 

[Wad325]

Sizes of bush and last pic bush inside bandit 12 swinging arm bearing cheers