Bandit 12 & gsxr 1127 sprocket covers

[Foz]

Are the above interchangeable or does it require a different push rod ?

[davecara]

Yes and possibly 

[Foz]

19 minutes ago, davecara said:

Yes and possibly 

About as much use as tits on a fish ain’t you :-)

[wraith]

Yes interchangable.

[davecara]

12 hours ago, Foz said:

About as much use as tits on a fish ain’t you :-)

I try my best 

I know they’re interchangeable, I’ve got a B12 cover on my EF. You might need to buy some 5mm tool steel rod and faff making pushrods 

[Jaydee]

14 hours ago, Foz said:

Are the above interchangeable or does it require a different push rod ?

Yes they're interchangeable.  The bandit 12 slave cylinder piston has a blind hole that the push rod sits in. The gsxr piston doesn't so has a slightly shorter push rod than the 1200 one. You will have to piss around push rods lengths to get the clutch spot on.

[Foz]

Push rod fits and works fine , sprocket cover obviously fits the engine but needs a little trimming at the rear to clear the bandit frame . 

[Foz]

On 2/8/2020 at 12:41 PM, Jaydee said:

Yes they're interchangeable.  The bandit 12 slave cylinder piston has a blind hole that the push rod sits in. The gsxr piston doesn't so has a slightly shorter push rod than the 1200 one. You will have to piss around push rods lengths to get the clutch spot on.

I tried a few different lengths of pushrod and the original bandit one is the correct length