Foz Posted February 7, 2020 Posted February 7, 2020 Are the above interchangeable or does it require a different push rod ? Quote
Foz Posted February 7, 2020 Author Posted February 7, 2020 19 minutes ago, davecara said: Yes and possibly About as much use as tits on a fish ain’t you :-) 1 Quote
davecara Posted February 8, 2020 Posted February 8, 2020 12 hours ago, Foz said: About as much use as tits on a fish ain’t you :-) I try my best I know they’re interchangeable, I’ve got a B12 cover on my EF. You might need to buy some 5mm tool steel rod and faff making pushrods Quote
Jaydee Posted February 8, 2020 Posted February 8, 2020 14 hours ago, Foz said: Are the above interchangeable or does it require a different push rod ? Yes they're interchangeable. The bandit 12 slave cylinder piston has a blind hole that the push rod sits in. The gsxr piston doesn't so has a slightly shorter push rod than the 1200 one. You will have to piss around push rods lengths to get the clutch spot on. Quote
Foz Posted February 8, 2020 Author Posted February 8, 2020 Push rod fits and works fine , sprocket cover obviously fits the engine but needs a little trimming at the rear to clear the bandit frame . 1 Quote
Foz Posted February 9, 2020 Author Posted February 9, 2020 On 2/8/2020 at 12:41 PM, Jaydee said: Yes they're interchangeable. The bandit 12 slave cylinder piston has a blind hole that the push rod sits in. The gsxr piston doesn't so has a slightly shorter push rod than the 1200 one. You will have to piss around push rods lengths to get the clutch spot on. I tried a few different lengths of pushrod and the original bandit one is the correct length 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.