Srad 600 front end in slabby

[Billythekidd]

As title, wanting to know if the srad 600 forks will go in a slabby 750, are the dimensions similar etc??

[banoffee]

Folks - again, remember OSS isn’t just a forum... go and look at the front page.

http://oldskoolsuzuki.info/archives/category/modifications/front-end-swaps

[fatblokeonbandit]

How long do they need to be??

 

this is a set of 600 SRAD forks I modified to fit a bandit, with a bandit wheel to retain the speedo drive, they are 735mm ISH without the stepped home made yoke and 760mm ish with the yoke.. A slabby stem will fit straight in I believe.. This lot might be for sale soon as well..

 

[dupersunc]

You need a standard bottom bearing and om of these for the top. https://www.Eblag.co.uk/itm/Tapered-roller-bearings-30x47x12-mm/291457610520?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2648   Then the Srad yokes go straight in, save for a bit of fiddling with lock stops. 

Not sure on lengths tough.