Stewart750 Posted July 16, 2019 Posted July 16, 2019 Hey guys so I've been on my project for a while. Now I'm at almost completion stage but I'm a bit stuck on sprocket carrier bearing size, I've got a b6 wheel running a gs500 sprocket carrier and found out the bearings are different, also I'm going from a 630 chain Down to a 530 chain but off of what bike have you guys used? 1 Quote
wraith Posted July 16, 2019 Posted July 16, 2019 Bike is looking well I take it you're meaning the bearings on wheel and sprocket carrier are different? As if memory is right the b6 wheel is 20mm and the gs500 is 17mm, you just get a off the shelf bearing to match the wheel, I think the b6 carrier one will fit the gs500 carrier, but someone will be along to confirm this. As to the chain, you just get a 530 chain I think you will need about 120 links then cut down to what you need, or see if anybody has a old chain put that round the sprockets and count how many more links you need. Quote
Stewart750 Posted July 28, 2019 Author Posted July 28, 2019 What rear sprocket do you use? The gsx and the b6 sprockets don’t fit and I think the gs500 sprocket has a large difference on teeth doesn’t it? Quote
wraith Posted July 28, 2019 Posted July 28, 2019 Just ordered a sprocket for a gs500 (530 pitch) with the same number of teeth as the gsx750 has Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.