dupersunc Posted July 30, 2019 Share Posted July 30, 2019 Bandit or slingshot 1127 basket and slabby 1052 hub, cover and plates. I seem to remember that's what I used. Quote Link to comment
tyler Posted July 31, 2019 Author Share Posted July 31, 2019 im using that as a last resort, the steel "looks" hard, and i dont want to break a tool; moreover i havent taken it apart in a while but i think i would have to drill and tap holes, may have other fitting issues im unsure. My plan is to see if the clutches and inner hub are swap able like other posts i have seen converting to spring vs diaphragm. i know i need the 72, so hopefully this will work out. the rest of the clutch will be useless for me. 1 Quote Link to comment
tyler Posted August 1, 2019 Author Share Posted August 1, 2019 clutches are different, hub would swap if the actual clutches were correct. So machine the center of my hub down, or upgrade the basket to this steel one by pressing outthe rivets and swapping baskets. TIG weld the rivets back in. Machining seems easier. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.