Lucifer

Thanks Gixer1460! In my cars i use Always some synthethic from Castrol ( mostely magnatec). Will be no arm for gearbox? Right now waiting for some details to fix turbo. Running with carbs, 38mikuni. Bike is collected and Went true tehnical inspection with Clean list. Idling like shit- never know, up and down. Hope to scrap carbs soon. Worse is between 2500-3500 rpm... Seems hungry, maybe vacuum issues. Have gearing 15/45. Real Life begins at 5000rpm. Driving with 5 gear and 160km/h starting to pull up, wheelie. Have no idea what cams, or else has been changed in Engine. Has been during 32 years 9 more owners for bike. When i bought was like scrap, much dismounted, under dust, Engine not rotating... During reparation got many gray hairs, Electric wiring was mostly overmade, cut in so many places and made some not nesessary Connections, ECU one line out to coils was burned aso... Managed to restore wiring and Engine is working. Using dyno 2.2ohm coils. From upgrade now: front- 43mm forks, 17" rim 110/50, back- 130mm longer swing,190/55 -17" All bike ca 100mm lower. New bearings,brakes and so on..

Hi again! Long time ... Stupid question maybe, but running with turbo what could be best choice for oil? How to choose? After turbine or Engine/ gearbox... BR.

TD04 from saab aero...

Thanks! Got really good help from u guys! Microsquirt seems exactly what have been looking for...They have 36-1 twheels allso but smallest seems like 4". Will täke a look around to find something smaller. BR.

Cool! Seems promising. Will find out about triger. Thanks!

Thanks! That product seems strange yes... And answer for questions was from them that :we proovide only ECU and no customer support Is there anything else on market? I´d Like to skip carburettors and Dyna.. BR

Hi there! Having little difficulties right now to find good programmable ECU for my turboproject. Can someone recommend something? For cars is easy to find but for this engine... Have before build some turbo cars but never bike. Like i understand its needed now unit to lead for 2 syl.engine...? I found something like this: http://www.ecotrons.com/files/ECOTRONS%20Engine%20Control%20Unit%20(EC4T2CTHIGIA)%20technical%20spec.pdf There is inj 1 and inj2. Coil1, coil 2.... MAP sensor, O2, CPS... Nothing said about triggerwheel....How should look like? What u think about this, can that do well? Best Regards Ray.