Jay_111

Thanks guys, I will check that. I’m puzzled as to why it’s not working though. The loom is in good condition and everything looks ok. It’s a strange one. Am I to expect a broken wire in the loom then? Electics are my Kryptonite.

Hi all, Ive just rebuilt my 1100N and I have no rear lights. I have number plate lights but no brake or rear lights. Ive checked the bulbs, connections and Fuse but they are all good. It’s got me stumped. It was all fine before the motor came out Any ideas fella’s? Cheers Jay

Yeah sort of, so I initially ordered the 41's for GSXR1100 91/92 fitment and they would be preset for a stock motor. I am now strongly considering the 40mm versions for the Inazuma with dual stack funnels instead. Both sets would need re-jetting mains at least for a 1216.

They are new, arriving next month.

Yeah will definitely write it up if I can get it done.

It sounds like the 675 wheels are the way to go then given the width and more importantly the weight. If only someone would produce a fitting kit.. lol. Once the bike is back with me work will start on this conversion. Unfortunately I have limited experience in this area but that won’t stop me trying. The front I can handle, the rear will obviously be more tricky. I don’t mind spacing out the front sprocket a small amount but getting offset ones doesn’t sound like fun. With a bit of luck, judging by what @dupersuncsaid, it may be an easier job than some, and hopefully without having to machine the hub..We will see. If anyone else fancies this conversion and or is doing it already then any shared info would be cool. @markfoggy Cheers Jay

Where are these mounted Dunc? I’m trying to find some pictures but failing, mostly because of photbucket. I’m interested in location and hose routing.

No mate, I don’t, Steve may have though and that’s a great shout so I will find out

Not FCR’s mate as like you said they aren’t good on the road, but TMR MJN’s are a different prospect altogether, or at least that’s why I’ve been led to believe

Anyone fitted these carbs to their bike with a 1216 kit? I have some 41mm fancy Yoshimura TMR MJN's and wondering how much jetting will be needed. Ive heard mixed things about these as far as jetting goes so Im after some first hand experience if you have any? Cheers Jay

Merry Christmas all, Im building my 1100N up this spring and wondering what are the lightest wheels I can fit straight up. I was looking at Dymags but they are very pricey so what works as a good bolt on upgrade? Slingy wheels seem really heavy, do later models fit ok? Cheers Jay

Thanks Guys, Brilliant info. @Swirl, you have a PM

Hello all, I need a bit of collective forum advice. I've got a 1100N which I pulled the motor and had Roger Upperton build to full 1216 spec. The bike was going to be a base for a nice project but now I want to keep the tuned motor for another build and get the 1100 back to stock and sell on. I can get a 1200 bandit motor way cheaper than a GSXR11 so wondered what I need to do to get it to fit? Any help would be appreciated. Cheers all Jay

I hear you Dunc. I also have quite a lot of SP2 bits that could be grafted on. Forks, brakes and wheels etc...

So I pick up the 1216 motor from Roger Upperton next week, it has cams and headwork too.. Problem is, I am now considering not putting it back in the frame and instead building a track 7/11 instead.. I have some BPF forks and an Ohlins rear and those plus the engine work is more than a tidy 1100N is worth... so do I A: Put it back together and sell it to fund the trackbike B: Buy another 1100 motor and shock and move on saving the parts for a 750 frame etc.. or C: Make the 11 the trackbike... Hmmm mm Thoughts?