gsxwill
-
Posts
393 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by gsxwill
-
-
Keys
in Air Cooled
Had my old gs550 done by a local locksmith a few years ago, he made new keys, just took the barrel into him as the numbers were worn,
Just find a good locksmith
- 1
-
8 hours ago, TonyGee said:
this gasket is for the 24 hole cam covers, but it had 20 holes as the 4 holes behind the chrome end covers dont need any.
Fits Suzuki GS1100 24 bolt cam cover gasket usa made. Cometic | Eblag
What he said
-
Can't help with the part number sorry
But i do remember a mate got one by searching for Gs 1100 a few years back instead Gsx1100 some sort of Americanism
Hope it helps
-
31 minutes ago, Gixer1460 said:
How about they charge £20 pitch fee's and include 2 free entries? I'm sure pitch holders will also be mooching around for stuff they want, so why not treat as regular punters?
That's what happens at the August autojumble and couple nights camping for free
-
On 2/22/2022 at 9:31 PM, Pudzrx said:
Pitch does not include the entrance fee btw.
They did not tell me that!
Cheeky buggers
-
7 minutes ago, TonyGee said:
no oil or brake fluid will come out of the top part of the antidive (where the hose bolts too) you can take the top part off with hoses still attached as both parts have a seal, it keeps both fluids separate. ive disconnected the small hose from the calliper on mine and just put a plastic plug in for now just to keep the crap out.
Lucky guess from me then
- 1
-
-
I believe flush first came on the 86 model
-
I think there was or is a YouTube video of someone putting gsxr cams in the rf900, can't remember if it was a success!
I want to say 750n cams, but don't quote me
-
Same as others bit of tape round the filters till they ran OK
Strangly only had the issue with my gsx models, gs models all ran OK without the tape
- 1
-
It's looking cracking, you should be well pleased,
-
Boyer bransden are basic, but they will do a solid job and last, just make sure they stay dry
- 1
-
On 2/16/2022 at 7:42 PM, Swiss Toni said:
Most cases, the spring always goes towards the oil.
Can't argue with that!!
But if it is oil tight, take the win
-
My first port of call on the Gs was always spray a bit of carb cleaner on the rubbers to check for air leaks
- 1
-
Ditch the anti dive,
I just made blanking plates!
Much better
Nice bike, good luck
- 1
-
Vjmc autojumble
Sunday 3rd April 2022
Popham airfield Hampshire SO21 3BD
8am till 2pm
Pitches £10
Entrance £5
No need to book just turn up on the day
-
On 1/27/2022 at 9:06 PM, FJD said:
Divide through 1.6 might do it....
-
Happy to be proved wrong, I was to busy falling off them in 89, so memory is definitely an issue
- 2
-
I believe its GA77A model code
R707 engine
If it says D my good tame mechanic says it could have been a grey import which were around a lot at the time
- 1
-
Great looking bike
-
Shell still seem to have some e5 in most garages for the time being , just the cheaper supermarkets who have gone right over to the e10 or at least on the south coast
-
10 hours ago, coombehouse said:
Yeah Granville is good stuff, though have always brushed it on (good quality brush)
Definitely going to be trying the spray gun route though next time
- 2
-
Autojumble open from 8 for early birds £10
9 30 for the rest of us £7
Always find interesting bits and pieces
-
Painter nailed the old martini rally colours, very nice
New trick frame equals Q plate?
in Trick Frames
Posted
As has already been said, a Q plate doesn't have the stigma of 20 years ago and you don't get penalised by insurance, if anything it shows you have done things like right way!!
Remember all insurance companies first thought is how can I get out of paying for this