wobblegob

All done and MOT'd. Now to sell it lol

just need to put bulb in back indicator and ready for mot

Paintwork tickled up. Not far off back together. Hopefully weekend, then get it up for an mot.

Woohoo running two wires had pushed out of the connector that goes from pickups to cdi box, must of been making some contact to allow a spark but not enough to make it run. Anyway all good now just got to balance carbs, when I find one of my adapters grrrr

its vht wrinkle paint

was all running before we pulled it to bits so it's something what we have done or disturbed. Stripped the carbs and give them a clean. Valve clearances have been done. So it looks like just gonna have to go through and double check stuff.

Swapped plugs didn't make any odds the plugs are sparking nice big fat white sparks

A little damp ish but not pissed wet through

Yep

Right guy's getting royally pissed off with this at min. back together enough to run ( in the losest turns .......run ) its running on 1/4 cyls but not on 2/3 cyls. Good spark, compression all good, fuel getting to carbs (block a carb inlet with my hand ......hand full of fuel) but will not run on 2/3 any ideas pissing me off at minute

Some pics from today's exploits

But more done today. Doesn't look like much but getting there ..........slowly lol

Bit more done this Sunday in shedlife lol. Swingarm in, out, in, out, shake it all about (forgot rear brake pivot needs to go in before swingarm )

Bit more done

Right chaps does anybody know if the cam cover bolts are the same as gsxr bolts ...........just thinking

Bits back from the powder coaters

Anybody know of any other shock that will fit this bike stock linkages etc don't mind if it jacks it up a little cheers chaps

Right in bits ready for powder coating. But have found that the pick up Engine cover is badly cracked has anybody got a spare for sale

Cheers for that jaffa will look into it

Fitted the new gear indicator switch, headstock nut etc. Even had it down the road Next job will be pull it to bits ready for powder coating etc ..........when I have the money

Got a little more done on it today but having a dilemma with speedo cable the gsx750f one is too short and the es one is different fitting at the wheel. Any ideas chaps ?

There you go captain

Will do captain next time I'm in there lol