-
Posts
159 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by kokolis
-
-
Nice buy
- 1
-
I ve run pods, bellmouths, for years, raced on street circuits.
If you keep the airbox on what so ever bike, you ll have her for life.
-
-
try to switch them with the other pair of the problem is also switched them are gone, if the problem stays on particular cylinder , most probably carbs.
any gsxr gsxf bandit oilboiler coil will fit
-
Cases
in Oil Cooled
ignition cover is the same on all oil coolers, starter clutch cover: 600-750-1052 is the same, and for 1127-1157 it's different with a bigger hub to accommodate the bigger clutch.
-
I bought a german slabby back in 88 for parts, different pistons and a tooth less on the crank.
-
97? Thats srad, different spacing.
-
DJ mains 130/134.
Pilots screws 2 1/2 turns out.
- 1
-
The short fuel lines are pina to find try an automotive shop, bike shops dont have them.
-
You just hit it with a pin, can be reused, google for the kit, but it ll cost 40/50 euro per set
-
Yes, them can be bored out to 33mm, and work wel on a Standard 1100, with filters you should need something like 140/150 mains
-
If you can afford them buy them, my advise is though buy 36mm.
- 3
-
Common work, could be anyone.
-
Vm29ss can be bored out to 33mm
- 1
-
92 is on the lower side, 95/98 is more suitable
-
Do the float bowls get full with gas?
-
VM33's
in Oil Cooled
Displacement x rpm obviusly
- 1
-
These are vm29ss carbs maybe bored out to 33 ( inlet is 34 but venturi side is 29 oem)
Use slabby or powerscreen inlet rubbers
-
VM33's
in Oil Cooled
The lochart slabby had vm 33 smoothbores iirc
- 1
-
There is not so much difference in slack but length plays a big rol, use the slabby one
- 1
-
22 hours ago, Boogieman said:
Can I do the same to an 1127 shim headed motor?
Cheers
Yes, but you have to use the head as a complete set
-
With a difference of 20kg between slabbys and slingys, for sure the slabby 11 frame would be lighter by to 2kg compared to a slingy
-
2k rpm lower on the 1100
-
There are no known issues with it.
If it works on the 1052, which it does, for sure want be a problem on the 1127.
new carbs
in Oil Cooled
Posted
Bst34ss 1100f, 1100r, 750f?
Directly bolt on with airbox.
Bst36ss 750/1100r bandit 12 you need inlet and outlet boots.