Neill666
-
Posts
150 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Neill666
-
-
Hi guys got a mates slabby at the shed with an irritating fault it will fire up ok run on choke revs harder choke off ticks over a bit lumpy right enough but as soon as you touch the throttle cuts out , it was running fine after set up at a local bike shop ,its had new plugs, the carbs are immaculate good clean spark got me stumped ? Any advice greatly appreciated :-)
-
Getting there slowly :-)
-
4
-
-
No problem sorry it took so long i'm not on here as much as I should be
-
-
-
Sorry for the lengthy delay Grebo
-
1
-
-
Just fukkin lovely that is :-)
-
Your local Pirtek will supply Earls fittings I think Yan, I know the Perth one has them
-
Not fully decided on colour yet coz I'm a fickle fukker but either a dark metallic gun metal grey or if the quality is good possibly red chrome vinyl wrap
-
Back from powder coating time to start rebuild ,engine degreased ready for paint, exhaust polished coz I canny afford a new one
-
3
-
-
Will do the frame is away to the powder coaters again a couple of bits we're very light in powder so one step forward another back :-)
-
Bit of progress :-)
-
1
-
-
I'm just outside Perth and won't be using rattle cans :-)
-
1
-
-
Tried painting before and got all the stuff,spray gun,compressor etc just lacking patience and a good eye but I'm gonna be more patient this time not even considering paint till I'm 100% happy with the prep
-
My Harris Gsxr ripped apart ready to get paint n polish trying to do most of the work myself but my powder coating oven just ain't big enough for my frame , took bodywork to a local painter for a quote and nearly fell off my fukkin feet when he quoted 725 quid for tank,seat and muddy in a single colour
-
Lovely shiny goodies :-)
-
Welcome yann , I do have a soft spot for the Egli and Moko Gsxr,s never seen a Martin frame like your but lovely bike :-)
-
1
-
-
Sell it ..... how much :-)
-
Speak to Scott Lamond frae Blair Andrew I believe he has plans for the brackets
-
It's a shame original Harris fairings are so thin on the ground still look good today
-
1
-
-
Shock mount is an ugly affair on mines will try get pics on Friday if I get to the workshop and remember :-), would like to redo it but don't trust any local welders
-
Thanks bud :-)
-
Had mines out for a winter warm up yesterday running sweet and sounding great but the bloody clutch fluid all leaked out again I believe a 2003 sv1000 seal fixes it ?
-
Saw that build .. very nice probably need to sell mines next year but would love just to tuck it away as an investment (well that's what I tell the wife)
Dresda
in Trick Frames
Posted
Another interesting project :-) go GS 1000 :-)