Stewart750

Hey guys, got a completely standard bandit apart from exhaust and was wondering what mods you do, e.g forks, rear shock, rear sets and etc. Any help would be appreciated Cheers

What rearsets are they off and how did you mount them Tony nitrous?

Hello again, been looking ato some of you guys gsxs and wondered how to put on rearrival sets to raise the footpeg height?

Cheers few the advice guys will have a look around and see what I can find

Hi guys, still new to this, I've got a 1200 bandit front for my 750et and also a 600 bandit rear wheel but just wondering if a sv650 wheel would go in as they have a 160 not a 150 tyre, Cheers Alex

Sup guys, as previous I still got a standard gsx, waiting on a bandit 12 front end, only problem is one of my rear shocks are on the way and was thinking of upgrading, any suggestions? Cheers Alex

OK no worries, cheers for that I will keep you guys updated on how it goes

OK so 1200 bandit front end is the best way to go, and I've got the mark 1 rear wheel, I've made the spacers and machined the sprocket carrier as well, just got to weld the torque arm for the rear caliper and then should be good to go?

Cheers bud, what would be the easiest way to go? as I don't want to use usd front ends.

Hey guys, got a standard 750et and I want to swap the suspension, I got a zx6r front end (early model) and the 1100 slabside stem presses straight in, I measured the fork difference and work out that I would lose 80mm plus 2 inches because of the 19 to 17 inch wheel difference but when I tried it with a 600 bandit rear wheel in the standard swingarm, it couldn't have been closer to the floor if it tried, I was wondering what front and rear ends I could use to still give me some sort of clearance? Cheers

I'll get some more pics for you guys tomorrow, cause the fork seals need doing badly, there the only thing wrong with it really haha

I've been looking but neither the gs, or gsx had anti dive?

Fork stanchions are 38mm