Jump to content

HUM

Members
 View Profile  See their activity

  • Posts

    81

  • Joined

  • Last visited

 Content Type 

Posts posted by HUM

    EFE CAMS

    in Air Cooled

    Posted

    Hi

    B ut Ur max speed on the roads is  112 KM motorway  ?  96 KM  normal roads ?    it is max second gear from 5   it  does not matter 100 HP or 124 HP  :P;)  LOL

    Same like discussions in US   " wooow I have 180 HP in my bike...."  "  U ever driven full speed ? "   "No  "   xD

    Jokes must be  :P

     

    HUM

    Hydraulic clutcch GSX 1100E

    in Air Cooled

    Posted

    Hello
    with my GSX 1100E
    I would like to change my clutch from cable to hydraulics.
    There are nice things from Magura , but the price is also nice..
    On the other hand, there are Chinese parts that cost a fraction ..
    I am concerned about the slave cylinder, as a encoder cylinder you can use Brembo or Suzuki.

    Does anyone have any experience with the Chinese parts?
    a.) opens and excludes the parts far enough

    b.) is it strong enough to operate clutch
    c.) what is the durability

    See  pic below of chinese part

    may be anybody has an alternative idea ?

    HUM

     

    Hydraulic clutch slave.jpg

    GSX 1100e starter

    in Air Cooled

    Posted

    All is done, new carbon inside , cleaned , greased , ....   but if engine is cold , no problem he is working like swiss clock ,   if engine is hot, behaving is sometimes as if the battery is empty, but not always.    battery is new, generator brings  app. 14V .... battery has 13,5V,  magnet switch is working... all fine everything  cool you could think ...  some say it can be brocken mass cable , the fat one connected to engine, or bad contacts of plus and mass cable ....  but this seams to be  OK...... but 35 years old    may be anybody has an idea ....  so plan "B" can be to put in an other one , may be more modern ....  Originals in good conditions cost horrible money ... 

    ET tail on a Kat

    in Air Cooled

    Posted

    nice Bike , tail looks good , almost better than the original block.......     but I must say Kat´s  was not my thing in the 80´s  , gas tank and side covers was  rather OK , the front plastic needless , front original fender was / is awful , seat looks like sausage xD I prefer , as less on the bike as better.....         but taste is individual  says the monkey and bite into soap xD

    GSX 1100E stage I

    in Air Cooled

    Posted

    Hi

    the rear shocks are standard  length Konis ,  from the 90s or begin 2000 , working quiet well , was in the older times state of the art for a drivable bike.  If u wamt I can check the serial number from this  Shocks

     HUM 

    what the hell . is that

    in Air Cooled

    Posted · Edited by HUM

    Hi all

     

    I am new  and rebuild a GSX 1100e

    can anybody tell me what is that  or what is the job of this part ? :|:(

    located left side in front of starter relais  pic´s in attchment

    In parts list it is called controluntit  in German " Kontrolleinheit"  see pic #24

     

    HUM

    Kontrolleinheit.jpg

    IMG_0069.JPG

    IMG_0070.JPG

    IMG_0067.JPG

×
×
  • Create New...