davecara
-
Posts
2,580 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by davecara
-
-
I've got them from the vault on here this morning
-
I'm getting some of our famous engine mounts laser cut for my EFE but the company doing them will only do a minimum quantity of 3 sets.
Anyone in the market for a set? Likely cost will be about £30 but if you want a set let me know and I should have a firm cost tomorrow
-
Its only ever a problem if your missus finds out how much it all cost you!!
-
1
-
-
9 minutes ago, homer said:
Swingarm will slide right in the frame. Swingarm will hit the "subframe" tubes because its odd shape.
Ah right ok, just a matter of making clearance then?
-
Was it just shaving the inside of the swingarm pivot or spreading the frame?
-
Late K gsxr arm into an EFE. Anyone done it? Only just picked the frame up so not had chance to measure up yet
-
PM me your address, I've got 3 set of those connectors surplus to requirements. Just remember me if you ever throw away any EFE bits
-
1
-
-
-
http://s1321.photobucket.com/user/Bufftester/media/sticks_zps88fc671b.jpg.html
and that one.
Not my pics btw, just nicked the fotofukit link off the thread in the link above
-
-
I've adapted late K series to work on my slingy, I've got hazard lights now!
-
1
-
-
17 hours ago, jameskat said:
The VR sensors are just shown as signal generator attached to the ignitor.
Thanks chief!
-
1 minute ago, Banditmac said:
Buy a manual online for 15quid or even less. Better then any cook book or bible....
Not if I can get one free!
-
Anyone have a link to a decent colour diagram? I need one that has twin vr sensors
apologies if there's somewhere dead obvious with them, can't find a bleedin thing browsing on my phone!
-
I had a play with it very briefly today actually!
Ive got one or more earthing issues that are causing noise that the sensor doesn't like. As soon as I've got the other bike bolted together I'll be full steam into this again. Don't think I'd spent anytime on it since about September! Life and kids keep getting in the way of my tinkering time
-
Anyone have a 550 and/or a 750 swingarm kicking about? Of know if a 235mm wide (ish) swingarm will fit?
-
Looking good so far! Be good to see it together
-
1
-
-
8 hours ago, Swirl said:
Dave, I've got a 650 Kat, gs750, and multiple engines gsxr 750 powerscreen 1127, etc come over and get ye tape measure out, but a 750 is going in the Kat very soon
I'll take you up on that mate, I've got to go to Northwest Controls and see paul about my throttle cables in the next week or so, so I'll give you a shout
-
15 hours ago, R1guy said:
Have you got a build thread going for this Guy?
-
1
-
-
LOVE that! Is that a shafty frame then?
-
I think I'm being overly hopeful about the 550!
Doesn't seem to be many GS frames about at the mo though. Can't afford to buy a complete bike and wouldn't be worth it as I only want the frame/tank/back light!
-
Anyone know if they are much different? I've a little project in mind involving a B12
i know either frame will need loads of bracing etc so not fussed about the hard work, just wondering wether the tank will still fit once a motor is fitted!
-
Might be worth a call to Colin at West Wirral Fabricators, he's a god with a TIG torch. He's been making trick swingarms for a few racers over the past few years an usually has a bike related job on the go. 0151 639 5282
-
2
-
-
M32x1.5 I get that to
[/URL]
Mk2 Bandit CDI
in Oil Cooled
Posted
Will one run a 1052?
Ive got a mk2 bandit loom I'm using and a late b12 cdi will be plug and play and less messing than redoing the plugs and adding the second pickup to the loom