katana11
-
Posts
200 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by katana11
-
-
front end finally on
-
thanks lads sorry for breaking any rule here
-
progress
-
1 minute ago, Gixer1460 said:
If on stock electrics you need 3.0 ohm - Dyna Green's.If you have a Dyna 'S' - same coils. If using a Dyna 2000 then either 3.0 or 2.2's are suitable (green or grey) - everything else is competition orientated and not suited to road use.
hi mate ,thanks for ur help here, i was going to buy dyna coils and taylor leads off used suzuki spares on Eblag about 175 sterling for one type they other are 206 sterling with the coil ends already on the leads, what do you think ?,my mechanic said dyna way better for the running, just sounds costly but seems to be the norm ?
-
dyna coils and leads for my 1982 katana 1100, what ohms are they ?what ohms do i need ?
-
well folks she is going together so far so good
.jpg.6bb63fb9eea8aca572b1141ab2b77fc8.jpg)
-
12
-
-
FOLKS ,anyone got a link for a manual for my katana 1100 1982,i have a haynes one but not detailed enough,im rebuilding the front end at the moment just want to make sure its put back correctly thanks dudes
-
busy times
-
xmas come early today
-
1
-
-
-
2 minutes ago, KATANAMANGLER said:
It should sit on top. Not inside. the flat of the c- nut facing up the top hat facing down towards the bottom yoke.
thanks mate ur a gent i will be able to get her sorted tonight thanks again
-
1
-
-
Just now, katana11 said:
thanks mate,but tell me does the top slab sit on top of the nut or does the nut go inside it ?
at the moment the nut will not fit inside the machined out top slab should it fit in or just sit on top
-
thanks mate,but tell me does the top slab sit on top of the nut or does the nut go inside it ?
-
folks can ye answer an issue i am having,im putting the top and bottom yokes on, does the top yoke fit down over the c nut or sit on top of it ?
-
1 hour ago, zed said:
that looks good i was going to get my katana frame powdercoated but i think i'll get it painted now ,(a while off yet though as i'm putting a gsxr motor in mine with a draw through turbo at the moment) any chance of letting me know the paint code if you've got it , thanks
well mate i dont know off hand here, it is a 1998 toyota corrolla silver so you should be ok for that,there is a fella selling a complete turbo kit in ireland for a katana 1100 an engineer in rolls royce built it,it has all the hardware cams the lot i think he looking 2500 euro
-
3 minutes ago, zed said:
the frame looks good , did you paint it or have it powdercoated ?
hi zed,i got it painted in waterbase toyota silver its a 93% match for original colour with 4 coats of hard laquer,the last bike i done was powder coated i prefer the paint if its covered correctly and powder coating is a lot softer then the hard laquer
-
we are getting there
-
1
-
-
13 hours ago, teltwosheds said:
Nice, though I'd bin the parking sign
you might be right but behind the katana there is a fatboy so the sign has to stay for another while
-
1
-
-
12 hours ago, Peterrr said:
Always good to see a katana!
Are you going for an Original bike or are you going to do some more upgrades?going to try keep her standard,apart from shocks and exhaust mate,difficult to get some parts
-
hows it going folks i have just started rebuilding the katana 11 1982,need all the help i can get here, thanks for adding me,i will try post some pics see my progress ,i am also looking for a good downloaded manual cant seem to find one,have the haynes one but not enough info on it.
-
3
-
-
how much are they ?
Suzuki katana 1100 1982 project
in Air Cooled
Posted
slowly does it folks