Kurf Posted September 11, 2018 Posted September 11, 2018 Hi guys, Strange ( electrical?) issue when trying to start my 1127. Starter motor does not work all the time when I push the starter button. Wiring is new, starter is 100%, start relais switches every time at push of button ( hear it clearly ), cleaned up surfaces for good earth and cleaned starter switch.. Still same issue... Can it be the sidestand switch? Quote
Gixer1460 Posted September 11, 2018 Posted September 11, 2018 More than likely or any other 'safety related PC bollux' that is fitted! KISS ..... Battery - Ign sw - Kill sw - starter button - starter soli - starter motor - earth ...........that's all that's needed! 1 Quote
fatblokeonbandit Posted September 11, 2018 Posted September 11, 2018 Duff battery is favourite, what's the battery voltage when you push the starter Tit ???? if it drops below 10 or 11 volts the relay wont latch and it will click and not turn the starter Quote
Kurf Posted September 11, 2018 Author Posted September 11, 2018 3 hours ago, fatblokeonbandit said: Duff battery is favourite, what's the battery voltage when you push the starter Tit ???? if it drops below 10 or 11 volts the relay wont latch and it will click and not turn the starter Thanks, Sounds logical : I did charge battery a while ago but will check voltage. Quote
Kurf Posted October 1, 2018 Author Posted October 1, 2018 Found it : switched solenoid and problem is gone now. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.