Phill106 Posted August 17, 2015 Share Posted August 17, 2015 Does anyone know the standard lift and duration of the 1127-K cams? Quote Link to comment
McLean Racing Posted August 18, 2015 Share Posted August 18, 2015 Duration is around 235 degrees and i think the lift is about 9mm on inlet and 8.7mm on exhaust iirc. Quote Link to comment
Phill106 Posted August 18, 2015 Author Share Posted August 18, 2015 Do you think a 245 degrees and 9.27 in, 9.27 ex would make Much of a power increase? Quote Link to comment
McLean Racing Posted August 18, 2015 Share Posted August 18, 2015 It should give it a bit more power in the top end and midrange depending on how u time them in Quote Link to comment
McLean Racing Posted August 18, 2015 Share Posted August 18, 2015 Do you think a 245 degrees and 9.27 in, 9.27 ex would make Much of a power increase? them specs sound like Kent suz7 street cams? Had a set of them in my old mans old motor i built, picked it up a little mainly noticable in the midrange untill i tweaked the cam timing a bit Quote Link to comment
Phill106 Posted August 18, 2015 Author Share Posted August 18, 2015 Thanks for the info Quote Link to comment
Phill106 Posted August 18, 2015 Author Share Posted August 18, 2015 them specs sound like Kent suz7 street cams? Had a set of them in my old mans old motor i built, picked it up a little mainly noticable in the midrange untill i tweaked the cam timing a bityou had any experience with the suz1 cams? Quote Link to comment
McLean Racing Posted August 18, 2015 Share Posted August 18, 2015 Not personally mate im affraid Quote Link to comment
jonny1bump Posted August 23, 2015 Share Posted August 23, 2015 Shoves all power up top, you need to check coil springs will not be coil bound. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.