Cable clutch on bandit 12 motor

[caferacerdan]

I've got the full cable clutch setup of a 600/750 and got the clutch pushrod off the 1200

Do I need a different pushrod or should it all be good? (Haven't had chance to fit it up and see yet)

[fatblokeonbandit]

you need to make a push rod, ivg done it several times, 600 bandit to 1127 and to 1157 also mark 2 600 to 1127, and every time i had to make a push rod the right length, its easy get a bit of 6mm wooden dowel and trim to length until it works then cut a bit of 6mm bar or an old push rod, easy peasy.