davecara Posted May 14, 2017 Posted May 14, 2017 Late K gsxr arm into an EFE. Anyone done it? Only just picked the frame up so not had chance to measure up yet Quote
homer Posted May 14, 2017 Posted May 14, 2017 I test fitted k-series arm few years ago (k7 1000 if I remember right). It will go there but efe's lower rear frame tubes needs modification. Also rearsets hits the arm. Linkage needs mounting lugs to the frame. Definately doable if you can weld. 1 Quote
davecara Posted May 14, 2017 Author Posted May 14, 2017 Was it just shaving the inside of the swingarm pivot or spreading the frame? Quote
homer Posted May 14, 2017 Posted May 14, 2017 Swingarm will slide right in the frame. Swingarm will hit the "subframe" tubes because its odd shape. Quote
davecara Posted May 14, 2017 Author Posted May 14, 2017 (edited) 9 minutes ago, homer said: Swingarm will slide right in the frame. Swingarm will hit the "subframe" tubes because its odd shape. Ah right ok, just a matter of making clearance then? Edited May 14, 2017 by davecara Grammar Quote
homer Posted May 14, 2017 Posted May 14, 2017 (edited) Yes it is quite straight forward if you are able to modify the frame tubes Edited May 14, 2017 by homer 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.