Swing Arm choices for Sling Shot ?

[Slingshot 7/11]

Let me start by saying hello !  I started a  7/11 or more correctly 7/12 project back in November when I found a very neglected 1989 GSXR 750 for sale. After picking up the GSXR I found a 1997 Bandit 1200 for sale complete, running and in fairly good shape. The Bandit has donated the engine, carbs, wheels, brakes , forks, switch gear and wiring harness. I bought what I was told was a GSXR 600 swing arm, later to discover it was actually from a 1998 GSXR 1100 and quite a bit longer than the original, which brings me to my question, what other options are there for braced,  short ( 750 length ) swing arms that will work with the Slingshot chassis? I had spacers machined up for the swing arm bearings and used the later larger axle with the Bandit rear wheel and it all worked out fine except I don't want the increase in wheel base. I was curious if an SRAD swing arm will work? Thank you in advance for any help.

[Captain Chaos]

Hi and welcome, cool project.

'94-'95 (pre-SRAD) GSX-R750 swingarm is the same as your 1100 arm but shorter.

[Slingshot 7/11]

Thanks ! I will start looking for one of those.