CockneyRick Posted March 5, 2017 Posted March 5, 2017 Stuck it in here as i'm putting the USD SRAD yokes into the GSXR750G frame. So can anyone tell me the bearing sizes for them both, & also the swingarm pivot ones for the 750G too? Quote
CockneyRick Posted March 7, 2017 Author Posted March 7, 2017 TA2530Z for the swingarm, but only thing close i think, is 32906 for the yokes? Anybody know if there available or even the proper 30-47-15? Quote
suzook12 Posted March 10, 2017 Posted March 10, 2017 Rick, if I get chance tomorrow, will look at my trade books and see what comes up. Got a busy day tomorrow, van mot in morning, post your exhaust, cut a tree down, have a look at a boat out norwich way then collect van and fail sheet and order parts...... So may need a nudge come Monday lol Steve Quote
suzook12 Posted March 10, 2017 Posted March 10, 2017 from a quick search, looks like srad uses 30 x 55 x 17 top and bottom, slabs n slings use 30 x 55x 17 bottom, 25 x 47 x 15 top, so assuming length is same you need a 30 x 47 x 15 top. Looking at allballs website, they do a 30 x 47 x 12, 3mm shim and you're good. part# 99-3540-5 , which is what they list in their conversion chart.... Their chart is pretty useful http://www.allballsracing.com/index.php/forkconversion Hope that helps Steve Quote
suzook12 Posted March 10, 2017 Posted March 10, 2017 Generic part number is 32906- you can get 1 here https://www.123bearing.co.uk/bearing-32906.php Quote
CockneyRick Posted March 10, 2017 Author Posted March 10, 2017 Found one that size on Eblag for £11, looks like that's the way to go with spacers Quote
suzook12 Posted March 10, 2017 Posted March 10, 2017 Marksman also do them though that chart is pretty useful though Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.