94gsxr-W 600 street fighter project

[falex008]

Hey guys been searching the forums and web but so hard to find info on this bike. This 600 was only made for 2 years and then discontinued but i know almost everything about this bike is based off the 750. My problem is to rebuild these carbs is almost as much as just buying a used set of carbs in good condition. I found a ton for the 750 and 1100 but i dont know if there direct bolt on? I plan on getting them synched after bike is finished. Thanks in advance 

[Madb]

I personally would rebuild them. At least ya know your carbs will be spot on. Second hand pair might be just as worn. 1100 are 40mm, 750 are 38mm. If ya want to fit 38mm on ya need the inlet rubbers too. Should be spaced the same as the casings are same on 600 750 900 and 1100w. 

[almostthere]

why not buy a set of 750 carbs and stick a set  of 750 barrels and pistons on