GSX1100G carb specs

[Jaydee]

A mate of mine bought a GSX1100G project. Missing a few bits, carbs being one of them. I was going to put a set from a slingshot 1127K. As the G uses a fuel pump I can imagine the carbs float heights won't be the same as suction feed 1127K. Anyone have any info on the carb specs, or info in general on the GSX1100G? Info seems to be thin on the ground when I googled. Thanks in advance. 

[Swirl]

a mate of mine is running bandit 12 carbs on his G with no issues

[Jaydee]

5 minutes ago, Swirl said:

a mate of mine is running bandit 12 carbs on his G with no issues

Hi Swirl. Can you find out if he used the stock float height? Just wondering if the fuel pump pressure might mean tweaking the floats to suit? Thanks. 

[Swirl]

will ask tomorrow, but I've got one that has carb issues, he mentioned two weeks ago his has b12 carbs and went on no issues but will ask him

[Jaydee]

Thanks mate. 

[Swirl]

Right, just spoke to him, he put the 1100g jets in the b12 carbs and bolted them straight on, his G has done 159k miles with no major engine work and he has owned in 23 years, its been all round Europe and runs as sweet as a nut

[Jaydee]

7 hours ago, Swirl said:

Right, just spoke to him, he put the 1100g jets in the b12 carbs and bolted them straight on, his G has done 159k miles with no major engine work and he has owned in 23 years, its been all round Europe and runs as sweet as a nut

Cheers Swirl. Now I know the stock (14.6mm) float heights should be good. 

Any one know the jet sizes for the G offhand?