Joebloggs Posted September 9, 2016 Share Posted September 9, 2016 I've virtually got the ES on two wheels, just waiting on the postman to deliver me front wheel spindle and it'll be a rolling chassis. What I would like is a pair of front calipers that came anodised from the factory (think GSXR Nissan etc) that will bolt straight on the T-Pot forks. I'm sure the stock one's will be up to the job but as I'm searching Eblag for parts anyway I figured why not go for upgrade (cosmetic if not performance) while I'm at it. Thanks in advance Quote Link to comment
banoffee Posted September 9, 2016 Share Posted September 9, 2016 http://oldskoolsuzuki.info/archives/741 Quote Link to comment
Joebloggs Posted September 9, 2016 Author Share Posted September 9, 2016 49 minutes ago, banoffee said: http://oldskoolsuzuki.info/archives/741 I've seen this although I think I'm right in saying the GSX750F isn't listed, my caliper hole centre's are aprox 85mm where as those listed (1) are 90mm Of course I could be wrong. Thanks for the reply Quote Link to comment
Joebloggs Posted September 9, 2016 Author Share Posted September 9, 2016 Well Eblag find has resolved the problem, set of calipers, lines and master cylinder on their way. Not saying how much as you'll either say that was cheap or all laugh at me. Reminder to self, keep the fuck off Eblag until pay day............... Quote Link to comment
banoffee Posted September 9, 2016 Share Posted September 9, 2016 Ah OK, I read 'GSX750 Katana' in the top section however on reflection I agree it isn't really a Katana Quote Link to comment
Swirl Posted September 9, 2016 Share Posted September 9, 2016 Another epic fail ive just swapped the front end on my teapot 750 and all the bits are going for sale bon Eblag soon same as the rear end Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.