caferacerdan Posted May 2, 2016 Posted May 2, 2016 just stripped the busa back end off my 88 slingshot frame as I want to use a standard swingarm instead. Now just want to check frame hasn't been cut etc so as said my frame is an 88j 750 slingshot my inside pivot arm to pivot arm is approx 9.5 inches...is this standard? also checking what pivot arm was installed in the busa arm and it was 20mm diameter...is this standard slingshot one? Quote
Rossco(Iceman Josros) Posted May 2, 2016 Posted May 2, 2016 20mm dia is correct and the width should be around 230mm or 9 inches in old money 1 Quote
caferacerdan Posted May 2, 2016 Author Posted May 2, 2016 40 minutes ago, Rossco(Iceman Josros) said: 20mm dia is correct and the width should be around 230mm or 9 inches in old money perfect cheers measured 235mm so pretty close. will buy a standard arm n hope for the best 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.