Busa back ens conversion GSXR 1100...

[ShadyPerm]

Hi all

 

I am looking at putting a gen 1 complete busa back end into my GSXR 1100 K frame,, is this a fairly straight forward fit? Does the busa swingarm spindle fit into the frame or am i going to have to use an 1100k spindle and make spacer etc to fit? (Are all 1100/750 spindles the same?) only reason i ask is that i am finding it hard to find one complete with spacers pivot adjuster and nuts ,, 

thanks 

scott

[Paulm]

Put the slingshot spacers inside the Busa spacers and the slingshot spindle will fit,I glued mine together with chemical metal,was in the bike for several years with no probs,can't remember what knuckle or dogbones I used though sorry. I think I  made a smaller length spacer inside the sprocket carrier to push the carrier into the wheel further and reversed the sprocket as well.

Edited March 9, 2016 by Paulm

[ShadyPerm]

Yea I saw an old post of that done, think I will give it a whirl. Thanks for tips! I have got a bespoke mount to fit the shock off Danm54 which will save me a lot of messing.. 

Cheers 

[Paulm]

No problem,start a project thread and put some pics up.

[ShadyPerm]

I am definitely going to, i am just in the process of sorting a workshop out.. Then the build can start!! Just getting ahead of myself and buying bits so i can get stuck straight in!!!