spiderpig Posted Friday at 07:10 PM Posted Friday at 07:10 PM Have gsxr head gone onto the b12, fitting gsxf 11 cams. Soooo, timing marks lined up, 24 pins between... Torque everything down, fit the cam chain tensioner, clicks in... Go to turn the motor, the crank turns, tensioner takes up more slack and now my timing marks don't line up What am I missing here??? Quote
fatblokeonbandit Posted Friday at 07:54 PM Posted Friday at 07:54 PM you need to pull the front of the chain up tight before fitting the exhaust cam and lining that up first at least now you can see how many teeth you are out and just move the chain amount 1 Quote
TLRS Posted Friday at 07:56 PM Posted Friday at 07:56 PM Not missing any observational skills that's for sure 1 Quote
spiderpig Posted Friday at 08:24 PM Author Posted Friday at 08:24 PM 24 minutes ago, fatblokeonbandit said: you need to pull the front of the chain up tight before fitting the exhaust cam and lining that up first at least now you can see how many teeth you are out and just move the chain amount Yeah, thought i had the slack out but it had to be that... Looked like I was 1 tooth out so was gona move the sprocket... So I stripped to redo, the chain hopped off the sprocket, had to reset it, rebuilt... THE EXACT SAME THING HAPPENED Third time was a charm lol Know the fucker inside out now Quote
fatblokeonbandit Posted Friday at 09:05 PM Posted Friday at 09:05 PM If at first you don’t succeeded, fek it off and go to the pub got there In the end shipmate 2 Quote
spiderpig Posted Friday at 09:21 PM Author Posted Friday at 09:21 PM I'm not one to stop Off licence was first port of call after here Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.