Niqueman14 Posted July 7 Posted July 7 hello just wondering has anyone ever put a oil cooled 1100 motor into a watercooled 1100 frame? I'm having a hard time finding a replacement motor for my 96. im for sure motor mounts dont line up but if someone has done it and has info and pics it would be appreciated Quote
Upshotknothole Posted July 7 Posted July 7 I think they just need new engine mounts, otherwise the dimensions aren't too far off. People have done them, but it's been a while since I've seen any. You'll need oil cooled carbs, cooler, ecu, and I don't think your harness will work with it. Quote
Niqueman14 Posted July 9 Author Posted July 9 I figured it would just be a matter of making new mounts for the new location just was wondering if anyone may have pictures or measurements or template.. also with the wiring harness you I could get away with just the main engine harness or the whole thing?? I already figured the ecu and oil cooler Quote
Upshotknothole Posted July 9 Posted July 9 Posted these in the other thread by mistake. Check these old threads. Unless you're pulling apart the harnesses, the main engine harness is the majority of the harness. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.