Hooligan666 Posted March 14, 2024 Posted March 14, 2024 Hi all, I have a 92 gsxr 1100 slingshot and being looking at why my clutch isn't engaging when bleeding...stripped it apart again to look at stuff however I was wondering on the lentgh of the push rod for it...is it about 100mm in size? Cheers Quote
Gixer1460 Posted March 14, 2024 Posted March 14, 2024 Has it worked ok before? They are notorious for not bleeding easily although the few i've done came good after a while! If it has worked previously, then the rod length is correct - if parts (ie. cover / clutch) have been changed then all bets are off . . . . unfortunately! Quote
fatblokeonbandit Posted March 14, 2024 Posted March 14, 2024 GSXR 1100 L 23111-05A01 ROD, PUSH LH (L:101.5) 101.5 mm then 1 Quote
Gixer1460 Posted March 14, 2024 Posted March 14, 2024 (edited) Interesting ! Robinson's list two lengths - an early at 100.0 and a later at 105.0 ! The earlier has a superseded part # but its revised to the later one ! ! ! Guess its check engine # time! CMS on the other hand only quote one part # 23111- 05A01 but no length given but compatible with 1100 K, L, M & N - so, all the Slingshots. Edited March 14, 2024 by Gixer1460 1 Quote
Hooligan666 Posted March 14, 2024 Author Posted March 14, 2024 looking at it it has..but not sure...apparently it did to previous owner. just doing bits to it till i get get the carbs and stage 3 kit back in it. so far its had new hel lines for the clutch..new slave kit..new master kit and nowt yet ...it wont even reverse bleed...vacumm bleed or normal bleed. it'll push air through from the slave and the fluid from the slave out but nowt downwards...so either i have parts that have moved about in the master stopping it from pushing fluid...a blockage or a air bubble...maybe even defective new parts Quote
Hooligan666 Posted March 14, 2024 Author Posted March 14, 2024 12 hours ago, fatblokeonbandit said: GSXR 1100 L 23111-05A01 ROD, PUSH LH (L:101.5) 101.5 mm then fab dabey dozey!!!! looks like i have the right push rod then still. by the way....the red maroon 96 bandit you seen too is going strong fella!!!thankyou Quote
fatblokeonbandit Posted March 15, 2024 Posted March 15, 2024 10 hours ago, Hooligan666 said: fab dabey dozey!!!! looks like i have the right push rod then still. by the way....the red maroon 96 bandit you seen too is going strong fella!!!thankyou Good stuff, glad your bandit is still going well Quote
Hooligan666 Posted March 15, 2024 Author Posted March 15, 2024 10 hours ago, fatblokeonbandit said: Good stuff, glad your bandit is still going well Still on the same clutch aswel lol. Got to replace the oil cooler pipes on the front but that's about it Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.