Cam feed pipe configuration

[kev34]

On the loose fitting of these cam feeds, is it correct to have the feeds from the oil pick up point both going to the inlet cams and then going to the exhaust cam?

The lengths of the pipes would suggest that is the right way.

I'm assuming the exhaust side will get plenty oil, I don't want to start up the engine before I check this first.

[Gixer1460]

As the pipe lengths dictate where - you have it correct.

[kev34]

4 hours ago, Gixer1460 said:

As the pipe lengths dictate where - you have it correct.

Thank you.