Bandit s.a. spacers

[Goldie_lox]

Where is a good place to get frame spacers to use a 1200 bandit in a gs750

[Reinhoud]

That would be a job where you have the frame, swing arm bushes and lathe present, so you can make the flanges at the right thickness.

[Reinhoud]

Are you going to make a monoshock?

If yes, weld the top connection point for the spring in it before you do the swingarm bushes. The same if you want to reinforce the frame.

Swingarm bushes as last.

 

[Turbomangler]

here you go mate