andy120t Posted January 16, 2016 Share Posted January 16, 2016 Hi all, I'm just trying to sort my wiring for my 7/11 project. I have an 1100f Powerscreen cdi, loom and engine but not the right ignition barrel and it doesn't work. I think there is a resistor in the 1100f ignition barrel- is that right? And how do I fool my loom/CDI into thinking it's there? Before I buy an ignition barrel...can I just fit a resistor between two of the wires that go to the igntiion barrel. Am I correct that it's 100ohm; as lots of other Suzukis seem to have that, but I can't find any info. on the Powerscreen. thanks - andy. Quote Link to comment
Ben Slabby Posted January 16, 2016 Share Posted January 16, 2016 No resistor in powerscreen loom. Check your connections, test with a multimeter and see if you've got power to the CDI/coils. Check ground connections, etc. If all else fails, bridge the red and orange wires at the ignition switch connection on the loom and try again. 1 Quote Link to comment
vizman Posted January 16, 2016 Share Posted January 16, 2016 no resistor in the powerscreen loom as benslabby says..... Quote Link to comment
andy120t Posted January 16, 2016 Author Share Posted January 16, 2016 Great- thanks for the confirmation! Will recheck all connectors and power again. Andy Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.