Fula28 Posted January 10, 2016 Posted January 10, 2016 Just a quicky, I'm just trying to suss the k5-6 Gsxr front end into my slingshot, what bearings are we currently using, can't find the info on here at mo! Obviously going taperd roller, with 30mm k5 stem and slingshots 47mm o.d races. Cheers in advance. Folks. Quote
Ted M Posted January 10, 2016 Posted January 10, 2016 Hi the GSXR 750 K5 uses 30/55/17 bearings top and bottom according to Partzilla parts diagram hope this helps Quote
Fula28 Posted January 10, 2016 Author Posted January 10, 2016 Thanks Ted, yes got that info, just need to know what size bearings people are fitting to get the k5- into slingshot frame. Which has 47mm I.d race hole. As its bit of a confusion. Quote
Ted M Posted January 10, 2016 Posted January 10, 2016 Understood mate. I was looking into similar problem with my B12 and the nearest I could get was 30/47/12 from simply bearings. I was thinking of a spacer on top to make up the 3mm (don't need to worry about it now cos the stem isn't long enough anyway) Quote
Fula28 Posted January 10, 2016 Author Posted January 10, 2016 Yes I'm getting similar results, but I know people have done this mod few time just cannot find the gen, about it. Must keep diggin! Quote
Fula28 Posted January 10, 2016 Author Posted January 10, 2016 Yay found it whoop! shop.marksman-in.com 32006 bottom bearing .32906 top bearing . £33 Sheets winner? 1 Quote
Gammaboy Posted January 13, 2016 Posted January 13, 2016 On 10/1/2016 at 7:19 AM, Fula28 said: Yay found it whoop! shop.marksman-in.com 32006 bottom bearing .32906 top bearing . £33 Sheets winner? Hunting the same set of bearings, and the fuckers are saying it's *under* the minimum weight they'll ship to Australia. Seriously, WTF? Meanwhile, All Balls want $40USD for just the upper bearing (with spacer and dust cover), $56.75USD total if you include the lower, plus $45 shipping - Get fucked! 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.