Panos Posted July 13, 2021 Posted July 13, 2021 A few months ago as i removed my oil cooler ( GSXR 1100 N ) one bolt stripped the threads and cracked the fitting of the oil cooler where the oil lines connect . If i had to do it again i would just remove the lines from the sump and leave the ones on the oil cooler connected. Recently i had the idea to cut the old fittings and have AN8 or AN10 fittings welded in place . Anybody here done that before? Quote
colinworth79 Posted July 13, 2021 Posted July 13, 2021 Yes , just welded up the holes then a an-8 fitting on top . 1 Quote
Panos Posted July 13, 2021 Author Posted July 13, 2021 2 minutes ago, colinworth79 said: Yes , just welded up the holes then a an-8 fitting on top . You didnt cut the fitting off? I think i probably need to cut it because the crack goes all the way to the center . Could you please post a pic of it , if it is possible ? Quote
colinworth79 Posted July 15, 2021 Posted July 15, 2021 No just welded the bolt holes up then laid the fitting on top. I will see if I can put a pic up tonight . 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.