Jump to content

Carb leak


Recommended Posts

Posted

Hello. Few days ago i noticed petrol smell in garage. Then i see that gsx is leaking beadly. It was leaking from carbs in to engine and then from rear sprocket oil seal :S

 

So engine was full of oil/petrol. So everything is dismounted, i will wait till petrol evaporates totaly. Then engine flush with new oil. 

Then i dismounted carbs. When i set petcock to PRI it starts to leak beadly from carb 1 and 2. Floats and needles that opens/closes petrol work ok. Cant figure out what is the problem?? May be float hight??

With petcock set ON everything is normal.

 

 

Posted

I've had carb problems too. There's loads of posts with your bikes issue. Sounds like fuel leaking past float valves on 2 carbs. Probably need new float valves. Been posts on here how to check carbs for leakage.

Posted

That's a massive fuel leak. The carbs look really clean and in good shape. Have they been apart recently? Anyway, if they were mine I'd be taking the whole lot to bits and replacing the seals and any other parts that are obviously worn. BS carbs have joins between carb pairs for the fuel intake, with each removable alloy stub having 4 o'rings (I think, maybe 2). If these are perished, fuel is going to piss out like in your video :).

Posted

Also, there are O rings under the float needle seat, which are prone to failure

Replace all of the O rings in your carbs

CycleOrings.com

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...