HWB Posted May 6, 2020 Author Posted May 6, 2020 23 minutes ago, Jaydee said: See where I'm pointing? That's the part you measure for piston diameter. Yes i know but if you look again at the pic i posted the kit says 19mm shaft 46mm piston 49mm reservoir so i was referring to the reservoir because when i measured the od it looks to be 51mm does that imdicate 49mm id ? Quote
Askamaskinservice Posted May 6, 2020 Posted May 6, 2020 6 hours ago, Dezza said: I am following this with interest, and I am especially keen to see pics of what happens after the top of the canister marked 'Do not open, gas filled' is opened What could possibly go wrong. 3 Quote
Jaydee Posted May 6, 2020 Posted May 6, 2020 Had a look at a couple of spare Ohlins I have. This shock shown is a gsxr 1100 item so this confirms the codes were superseded with new ones. SU8050 is now SU003 (gsxr750 88-95) SU9050 is now SU002 (gsxr1100 89-98) 1 Quote
HWB Posted May 6, 2020 Author Posted May 6, 2020 This is my first ever attempt at rebuilding a shock so thanks for the support i WILL not be able to successfully go through all the steps without your feedback so thanks again. I ordered the rebuild kit now its just waiting.. Cheers Quote
HWB Posted May 22, 2020 Author Posted May 22, 2020 On 5/6/2020 at 11:52 PM, Jaydee said: Had a look at a couple of spare Ohlins I have. This shock shown is a gsxr 1100 item so this confirms the codes were superseded with new ones. SU8050 is now SU003 (gsxr750 88-95) SU9050 is now SU002 (gsxr1100 89-98) Hey Jaydee any idea of the torque spec for the shaft nut ? Quote
Jaydee Posted May 22, 2020 Posted May 22, 2020 11 minutes ago, HWB said: Hey Jaydee any idea of the torque spec for the shaft nut ? Leave it with me. I have a load of Ohlins stuff on the pc. I 'll have a this evening. Quote
HWB Posted May 22, 2020 Author Posted May 22, 2020 28 minutes ago, Jaydee said: Leave it with me. I have a load of Ohlins stuff on the pc. I 'll have a this evening. That great man ive been searching online for a manual but nothing... thanks alot Quote
Jaydee Posted May 23, 2020 Posted May 23, 2020 7 hours ago, HWB said: That great man ive been searching online for a manual but nothing... thanks alot Is this what you're after? Quote
HWB Posted May 23, 2020 Author Posted May 23, 2020 9 hours ago, Jaydee said: Is this what you're after? I was actually referring to the nut thats inside the cylinder, the one that holds the piston and shims Quote
HWB Posted May 28, 2020 Author Posted May 28, 2020 Jaydee quick question, when refilling the body does the ifp need to be seated all the way at the bottom of the reservoir ? Also should it have a slight pressure to make bleeding quicker ? Any tips from anyone knowledgeable please ? Need to know the final steps Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.