Not_so_Evil_Lloyd Posted April 18, 2020 Posted April 18, 2020 Here you can see the gap between the frame and the plastics where grab rail should fit. Quote
Not_so_Evil_Lloyd Posted April 18, 2020 Posted April 18, 2020 The bolt holes line up fine on subframe under where pillion seat sits Quote
Not_so_Evil_Lloyd Posted April 18, 2020 Posted April 18, 2020 And finally lugs. The front ones do mate up with tank. I don't have the tank at home as i didn't really want to explain that to insurance if somet went wrong. But when i took it off the front lugs fit as they should. The lower ones do not line up with anything but i can't see it being an issue to make a bracket with gromit off the pillion foot rest hangers. Quote
minipower Posted June 7, 2020 Posted June 7, 2020 On 4/14/2020 at 8:41 PM, Captain Chaos said: I believe @minipowerdid this some 15 years ago. But he's not online much lately. AFAIK frame does not need cutting. Question is already answered, but is used the plastics and subframe. Simple switch thanks to our modulaire Suzuki :-) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.