gsxr 1100w cams

[manden]

any one knows the base circle of the cams? and will they go in an rf900 head? a friend has been offered some race cams from an 1100 he is thinking on dropping in an rf900

[Cheeky4648]

@manden

Base circle is 1”100th (28mm)

cam bearing diameter is 22mm

overall length of cams 13 3/4 inches. 

Cam bearing centers from ends of cam going towards ctr of cam below 

sprocket side 1 1/4 in. Then 4 1/2 in.  Same for other side. 

32 tooth cam sprockets 

dont know if they will for an RF900 but I suspect they will. Buckets and springs are the same part numbers. Good luck. 

Edited August 18, 2019 by Cheeky4648

[manden]

Thanks mate