Gsxr750wr forks/swing arm compatibility

[Loopeloose]

Hi everyone I have just bought a winter project a 1994 GSXR750 that I'm going to streetfighter, I want to upgrade the forks, swing arm and brakes, my question is what forks and swing arm fit or can be fitted without to much trouble

thanks in advance 

[badgerkdd]

Bit of an open ended question this, do you have anything in mind, it'll be easier to narrow down what will and won't fit if we know what you're planning?

[kja.busa]

Do you intend to use the existing yokes? Or change to a complete new front end, which would possibly mean a stem swap in the new bottom yoke?

[Del]

Hi everyone I have just bought a winter project a 1994 GSXR750 that I'm going to streetfighter, I want to upgrade the forks, swing arm and brakes, my question is what forks and swing arm fit or can be fitted without to much trouble

thanks in advance 

Yours already has a really good braced arm,so i'd stick with that. Busa,k-series,srad,etc will drop straight in,as your frame uses a 25mm swingingarm pivot spindle. It really depends what type of arm you want?

Same with the rear,it all depends what you want?
Fitting wise,fronts are also easy. Srad,k-series 600/750/1000,tl1000s/r,sv1000,busa,etc will drop straight in by using the stock 32006 bearing on the bottom yoke and a 32906 bearing(from marksman) up top. You'll need to mod the lockstops 

http://shop.marksman-ind.com/99-3540-5-30x47x12-taper-roller-bearing-32906-15086-p.asp

Edited September 24, 2015 by Del