Gsx750f swing arm

[Rossy]

Dose any one know size of a gsx750f swing arm 1999 on I have a gsxr750wn back wheel and all the bits or a swing arm swap I could just bolt in bit I would like to use a 180 tyre for my project gsx600f 

thanks 

Edited May 7, 2019 by Rossy

[fatblokeonbandit]

That's what I did, it's all in my project thread.  I'm a little tpot..

[Rossy]

On 5/7/2019 at 9:23 PM, fatblokeonbandit said:

That's what I did, it's all in my project thread.  I'm a little tpot..

Did you use a 12 bandit wheel and sprocket Carrier. I’m trying to use a 750wn wheel 

[fatblokeonbandit]

Right I used a Mark 1 1200 bandit wheel and sprocket carrier, the LH spacer was a 750 slingy one, the RH was a B12, the swinging arm needs to be opend up to take the 20mm spindle, and 600 bandit adjusters used, the caliper hanger I was told was a gsxr 750 slingy one, but not sure??

 

 

 

[Rossy]

Thanks I got the swing arm and open it up now just got find a 12 wheel and some spaces 

[Daveyboy]

On 5/17/2019 at 2:04 PM, Rossy said:

Thanks I got the swing arm and open it up now just got find a 12 wheel and some spaces 

I have a 12 wheel on that site!! At mo if it'll help you out??